Bakin karfe SAW waldi waya ER309LMo da juyi Welding jointing
FASSARAR welding
Kar a bar tambayoyin
Ci gaba da ratsa ku
Rashin kwanciyar hankali
Gyaran mara kyau
Wuce kitse
Ana amfani da shi sau da yawa don walda na carbon karfe da bakin karfe ko
don walda na martensitic da ferritic bakin karfe tare da matalauta tauri
Hakanan ana iya amfani dashi a masana'antar petrochemical, tashar wutar lantarki
da sauran masana'antu, kamar reactor ciki bango surfacing mika mulki karfe.
Ripple lafiya
Bakin karfe da carbon karfe, low
gami karfe da sauran m kayan waldi
Ko surfacing 316 jerin waldi tare da mai kyau weldability, mai kyau tsaga juriya
Sauƙi slagging
Sigar Samfura
KASHIN KIMIYYA:
| ALOY(wt%) | C | Si | Mn | P | S | Ni | Cr | Mo |
| GB/T dokokin | 0.025 | 0.45 | 1.5 | 0.025 | 0.002 | 13.5 | 22.5 | 2.3 |
DUKIYAR INJI:
| DUKIYA | Ƙarfin haɓaka (Mpa) | Tsawaita /% | IMAPACT DARAJAR J/℃ | Intergranular lalata | ||||
| GB/T dokokin | 590 | 35 | - | Hanyar GB/T4334E ta wuce | ||||
SHAWARAR MATSALAR welding:
| BAYANIN DIAMETERS(mm) | 2.4 | 3.2 | 4.0 | ||||
| Volt | 28-32 | 28-32 | 28-32 | ||||
| Am | 270-360 | 400-550 | 500-650 | ||||
| Gudun gudu (mm/min) | 250-320 | 300-420 | 400-480 | ||||
| Dry elongation (mm) | 20-24 | 22-26 | 30-34 |
Tallafin masana'anta
Samfurin ya dace da a
fadi da kewayon aikace-aikace
FASSARAR welding
-
Kayan walda don kwantena
-
Sanmen 2# baya aiki
Mai amfani tukunyar jirgi
KASHIN KIMIYYA:
| ALOY(wt%) | C | Si | Mn | P | S | Ni | Cr | Mo |
| GB/T dokokin | 0.025 | 0.45 | 1.5 | 0.025 | 0.002 | 13.5 | 22.5 | 2.3 |
DUKIYAR INJI:
| DUKIYA | Ƙarfin haɓaka (Mpa) | Tsawaita /% | IMAPACT DARAJAR J/℃ | Intergranular lalata | ||||
| GB/T dokokin | 590 | 35 | - | Hanyar GB/T4334E ta wuce | ||||
SHAWARAR MATSALAR welding:
| BAYANIN DIAMETERS(mm) | 2.4 | 3.2 | 4.0 | ||||
| Volt | 28-32 | 28-32 | 28-32 | ||||
| Am | 270-360 | 400-550 | 500-650 | ||||
| Gudun gudu (mm/min) | 250-320 | 300-420 | 400-480 | ||||
| Dry elongation (mm) | 20-24 | 22-26 | 30-34 |
