Bakin Karfe Flux Cored Waya E316LT1-1/4 Weld ikon iska
FASSARAR welding
Kar a bar tambayoyin
Ci gaba da ratsa ku
Rashin kwanciyar hankali
Gyaran mara kyau
Wuce kitse
Dace da petrochemical, jirgin ruwa matsa lamba, abinci inji, likita inji, sinadaran taki da sauran masana'antu, waldi 18% Cr-12% Ni-2% Mo bakin karfe (SUS316, SUS316L, da dai sauransu).
Ƙarfin walda yana ƙunshe da adadin da ya dace na ferrite, kuma ƙarancin hankali yana da ƙasa
Ripple lafiya
Saboda babban abun ciki na Mo,
kyakkyawan juriya na lalata;
Abun ciki yana da ƙasa kaɗan, zafi mai zafi na ƙarfe na weld
a cikin yanayin zafi mai zafi yana raguwa, arc yana da taushi da kwanciyar hankali, spatter ya ragu, gyare-gyaren shine
kyau, da slag kau ne mai kyau, da waya ciyar ne barga, da waldi tsari yana da kyau kwarai yi.
Sauƙi slagging
Sigar Samfura
KASHIN KIMIYYA:
| ALOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Sauran |
| GB/T dokokin | 0.016 | 0.65 | 1.30 | 0.018 | 0.003 | 12 | 19.5 | 2.5 | Bi: ≤5ppm Ku: 0.01 |
DUKIYAR INJI:
| DUKIYA | KARFIN KYAUTA (MPa) | KARFIN ARZIKI(MPa) | Tsawaita /% | IMAPACT DARAJAR J/℃ | Maganin zafi °C*h | |||||
| GB/T dokokin | - | 590 | 40 | - | - | |||||
SHAWARAR MATSALAR welding:
| BAYANIN DIAMETERS(mm) | 1.2 | 1.6 | |||
| Voltage (Volt) | 20-36 | 24-38 | |||
| Wutar Lantarki (Amp) | 120-260 | 200-300 | |||
| Gudun (mm/min) | 15-25 | 18-25 | |||
| Tsawon tsayin bushewa (mm) | 15-25 | 15-25 |
Tallafin masana'anta
Samfurin ya dace da a
fadi da kewayon aikace-aikace
FASSARAR welding
-
Wutar Nukiliya ta Shandong CV20
-
YAMAL LNG project
Hudong LNG mai ɗaukar kaya
KASHIN KIMIYYA:
| ALOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Sauran |
| GB/T dokokin | 0.016 | 0.65 | 1.30 | 0.018 | 0.003 | 12 | 19.5 | 2.5 | Bi: ≤5ppm Ku: 0.01 |
DUKIYAR INJI:
| DUKIYA | KARFIN KYAUTA (MPa) | KARFIN ARZIKI(MPa) | Tsawaita /% | IMAPACT DARAJAR J/℃ | Maganin zafi °C*h | |||||
| GB/T dokokin | - | 590 | 40 | - | - | |||||
SHAWARAR MATSALAR welding:
| BAYANIN DIAMETERS(mm) | 1.2 | 1.6 | |||
| Voltage (Volt) | 20-36 | 24-38 | |||
| Wutar Lantarki (Amp) | 120-260 | 200-300 | |||
| Gudun (mm/min) | 15-25 | 18-25 | |||
| Tsawon tsayin bushewa (mm) | 15-25 | 15-25 |
