Bakin Karfe Flux Cored Wire E316LT1-1/4 Sinopec refining da chemical weld
FASSARAR welding
Kar a bar tambayoyin
Ci gaba da ratsa ku
Rashin kwanciyar hankali
Gyaran mara kyau
Wuce kitse
Dace da petrochemical, jirgin ruwa matsa lamba, abinci inji, likita inji, sinadaran taki da sauran masana'antu, waldi 18% Cr-12% Ni-2% Mo bakin karfe (SUS316, SUS316L, da dai sauransu).
Ƙarfin walda yana ƙunshe da adadin da ya dace na ferrite, kuma ƙarancin hankali yana da ƙasa
Ripple lafiya
Saboda babban abun ciki na Mo, yana da kyau
juriya na lalata; all-matsayi waldi
-196C low zafin jiki taurin yana da kyau kwarai, dace da low zazzabi ajiya tankuna, kwantena da sauran ƙananan zafin jiki kayan aiki waldi: taushi da kuma barga baka, m fantsama, da kyau forming, mai kyau slag kau, barga waya ciyar, tare da kyakkyawan waldi aiki yi.
Sauƙi slagging
Sigar Samfura
KASHIN KIMIYYA:
| ALOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Sauran |
| GB/T dokokin | 0.02 | 0.5 | 1.40 | 0.02 | 0.003 | 12.2 | 18.6 | 2.5 | ku: 0.01 |
DUKIYAR INJI:
| DUKIYA | KARFIN KYAUTA (MPa) | KARFIN ARZIKI(MPa) | Tsawaita /% | IMAPACT DARAJAR J/℃ | Maganin zafi °C*h | |||||
| GB/T dokokin | - | 570 | 40 | 34/-196 | - | |||||
SHAWARAR MATSALAR welding:
| BAYANIN DIAMETERS(mm) | 1.2 | 1.6 | |||
| Voltage (Volt) | 20-36 | 24-38 | |||
| Wutar Lantarki (Amp) | 120-260 | 200-300 | |||
| Gudun (mm/min) | 15-25 | 18-25 | |||
| Tsawon tsayin bushewa (mm) | 15-25 | 15-25 |
Tallafin masana'anta
Samfurin ya dace da a
fadi da kewayon aikace-aikace
FASSARAR welding
-
Polypropylene reactor
Harbin Electric kofa uku CMT
-
308,000 ton VLCC na danyen mai
KASHIN KIMIYYA:
| ALOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Sauran |
| GB/T dokokin | 0.02 | 0.5 | 1.40 | 0.02 | 0.003 | 12.2 | 18.6 | 2.5 | ku: 0.01 |
DUKIYAR INJI:
| DUKIYA | KARFIN KYAUTA (MPa) | KARFIN ARZIKI(MPa) | Tsawaita /% | IMAPACT DARAJAR J/℃ | Maganin zafi °C*h | |||||
| GB/T dokokin | - | 570 | 40 | 34/-196 | - | |||||
SHAWARAR MATSALAR welding:
| BAYANIN DIAMETERS(mm) | 1.2 | 1.6 | |||
| Voltage (Volt) | 20-36 | 24-38 | |||
| Wutar Lantarki (Amp) | 120-260 | 200-300 | |||
| Gudun (mm/min) | 15-25 | 18-25 | |||
| Tsawon tsayin bushewa (mm) | 15-25 | 15-25 |
