Bakin Karfe Flux Cored Waya E316LT1-1/4 Motocin LNG kwalaben walda
FASSARAR welding
Kar a bar tambayoyin
Ci gaba da ratsa ku
Rashin kwanciyar hankali
Gyaran mara kyau
Wuce kitse
Dace da petrochemical, jirgin ruwa matsa lamba, abinci inji, likita inji, sinadaran taki da sauran masana'antu, waldi 18% Cr-12% Ni-2% Mo bakin karfe (SUS316, SUS316L, da dai sauransu).
Ƙarfin walda yana ƙunshe da adadin da ya dace na ferrite, kuma ƙarancin hankali yana da ƙasa
Ripple lafiya
Saboda babban abun ciki na Mo, kyakkyawan juriya na lalata; all-matsayi waldi
-196 ° C ƙananan zafin jiki taurin yana da kyau, dace da ƙananan tankunan ajiya na zafin jiki, kwantena da sauran ƙananan kayan aikin walƙiya: taushi da kwanciyar hankali arc, ƙarancin fantsama, kyakkyawan tsari, kawar da slag mai kyau, barga mai ciyar da waya, tare da kyakkyawan aikin walda.
Sauƙi slagging
Sigar Samfura
KASHIN KIMIYYA:
| ALOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Sauran |
| GB/T dokokin | 0.018 | 0.51 | 1.30 | 0.02 | 0.003 | 12 | 17.5 | 2.5 | ku: 0.01 |
DUKIYAR INJI:
| DUKIYA | KARFIN KYAUTA (MPa) | KARFIN ARZIKI(MPa) | Tsawaita /% | IMAPACT DARAJAR J/℃ | Maganin zafi °C*h | |||||
| GB/T dokokin | - | 560 | 40 | 34/-196 | - | |||||
SHAWARAR MATSALAR welding:
| BAYANIN DIAMETERS(mm) | 1.2 | 1.6 | |||
| Voltage (Volt) | 20-36 | 24-38 | |||
| Wutar Lantarki (Amp) | 120-260 | 200-300 | |||
| Gudun (mm/min) | 15-25 | 18-25 | |||
| Tsawon tsayin bushewa (mm) | 15-25 | 15-25 |
Tallafin masana'anta
Samfurin ya dace da a
fadi da kewayon aikace-aikace
FASSARAR welding
-
Xinjiang Kela 2
Babban aikin shuka magani
-
Gansu Lanke Petrochemical -50 ℃
propane mai siffar siffar tanki aikin
-
High matsa lamba hita na
Abubuwan da aka bayar na Hangzhou Boiler Group Co.,Ltd
KASHIN KIMIYYA:
| ALOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Sauran |
| GB/T dokokin | 0.018 | 0.51 | 1.30 | 0.02 | 0.003 | 12 | 17.5 | 2.5 | ku: 0.01 |
DUKIYAR INJI:
| DUKIYA | KARFIN KYAUTA (MPa) | KARFIN ARZIKI(MPa) | Tsawaita /% | IMAPACT DARAJAR J/℃ | Maganin zafi °C*h | |||||
| GB/T dokokin | - | 560 | 40 | 34/-196 | - | |||||
SHAWARAR MATSALAR welding:
| BAYANIN DIAMETERS(mm) | 1.2 | 1.6 | |||
| Voltage (Volt) | 20-36 | 24-38 | |||
| Wutar Lantarki (Amp) | 120-260 | 200-300 | |||
| Gudun (mm/min) | 15-25 | 18-25 | |||
| Tsawon tsayin bushewa (mm) | 15-25 | 15-25 |
